Jigs

Hardware

Tool Accessories

Trend

Wolfcraft

Kreg

Silverline Tools

Milescraft

Rockler

Unika

General Tools

Micro Jig

Souber

True Position Tools

UJK Technology

Bohning

Festool

Hettich

Häfele

Virutex

Black

Blue

Silver

0.00 Green

Orange

Grey

Multi Color

Wood 35cm Long

Yellow

50 Screws

Black (for 6/8/10/15mm Hole)

Black and Blue

Black/White

Blue/Grey

Doweling Kit

Gold

Green,cream

Green/Yellow

Mehrfarbig

Multi

Multi-colour

New version

Ph/Jig/Bs

White,black

Wood

black

orange

orange( )

silver

The Trend PH/JIG Pocket Hole Jig is great for fast and accurate joining of timber and plywood, giving strong instant joints. Solid hardened bushes with a variable pitch of 29 to 63mm.  Use on timber, MDF, plywood and blockboard. It allows a variety of joints to be created individually. Uses square drive self-tapping screws. Workpiece can be handled immediately after gluing and screwing, creating time-saving benefits. No clamps required.

Trend PH/DRILL/95 Pocket Hole Jig Replacement Stepped Drill 9.5mm TREPHDRILL95

Tradesman ALL IN ONE work top jig for up to 900mm worktops. Hard wearing solid laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. Left hand and right hand corners, 400mm radius penisular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps. Fixed lengths for 400mm, 500mm, 550mm, 600mm, 616mm, 650mm, 700mm and 900mm wide worktops. Cuts up to 40mm thick worktops with or without anti-drip postformed edge. Three open-e

Trend - KWJ900 Worktop Jig

Trend Worktop Offset Scriber - for quickly positioning worktop jigs.  Accounts for the offset ratio of cutter and guidebush when cutting worktops for fast jig setting.  Using the first cut as a template, the Offset Scriber transfers the second cut position accurately to the workpiece ensuring high accuracy.  Ideal for marking the joints accurately when fitting tops between walls where fine tolerances are required.  The perfect tool for setting out the correct cut position when fitting tops to out of square walls.  Eliminates the needs for measuring to ensure errors are minimised.

Trend Kitchen Worktop Jig Offset Scriber

GROOVES & TENONS ROUTER JIG: This Varijig Tenon and Grooving Jig allows grooves and tenons to be cut with a router, providing precise and accurate results for your woodworking projects. ADJUSTABLE FRAME: The frame of the jig is adjustable, allowing for narrower or wider grooves to be routed depending on your needs. The maximum adjustment is 70mm, depending on the diameter of the router base. MULTI-FUNCTIONAL JIG: In addition to routing grooves and tenons, this jig can be used to crosscut boards with a router or circular saw. The edge of the frame can also be used as a guide to trim a panel squ

Trend Varijig Tenon And Grooving Jig For Precise Routing Of Grooves And Tenons, VJS/TG/JIG

Two part adjustable block portable template set designed for recessing hinges in wooden doors & frames with a router. Features It is easy to use with minimal setting-up time, completing the job both accurately & quickly. Used on-site & in joinery shops to increase productivity with excellent results.Fully adjustable apertures for fire door requirements and renovation work. Idea for fitting a new door in an old frame. No need for marking out in the conventional way.Quick & simple to set-up as the hinge is used as the pattern.Clean & accuraterecesses are achieved every time. Suitable for timber 

H/jig/c Hinge Jig Skeleton Two Part In Case - Trend

Trend CASE/1001 Combi 1001 Carry Case - COMBI1001, COMBI1002, KWJ700 and KWJ900 Hard wearing carry cases to protect and allow for ease of carrying of the Trend COMBI1001, COMBI1002, KWJ700, KWJ900 & HR/JIG Hand carry strap. Tool not included.Length outside 1250mm Height outside 415mm

CASE/1001 Combi 1001 Carry Case Bag COMBI1001 COMBI1002 KWJ700 And KWJ900 - Trend

Trend Pocket Hole Jig Mini - Portable Pocket Hole Jig  Compact design perfect for repair work in situ on furniture, cupboards, and cabinets.  Supplied with twin bases for use on new work and repairs for increased diversity.  Fully adjustable from 18mm to 54mm centres for twin holes or stripped down for single pockets; ideal for repairs or joints on thinner components.  Comes ready to use, complete with drill, driver bit and screws.  High quality all metal build quality for durability, solid performance and consistency in any project.  Contents:  50 x No.7 x 30mm (1-1/4 inch) fine 1 x Long base

Trend Pocket Hole Jig Mini

The Trend Mortice & Tenon Jig MT/JIG enables mortice, tenons and dowel joints to be cut with a router. Ideal for cabinets, chairs and table joints. There is a one set-up system for both mortice and tenon giving perfectly fitting joints and is fully adjustable for compound angle joints up to 45. The reversible templates can be used to produce round and square end tenons and for accurate dowelling applications. It cuts mortice and tenon sizes of 1/4in (6.35mm) to 5/8in (15.9mm). A Unibase may be required for certain makes and models of router. All tenons are cut with a 5/8 inch diameter straight

Trend Mortice & Tenon Jig MT/JIG TREMTJIG

ADJUSTABLE LOCK JIG: Sliding plates and stops for mortice and faceplates from 30mm up to 250mm long, ideal for use with obscure sized locks as well as all standard locks and latches. QUICK AND EASY SET UP: Engraved on underside to allow fast, accurate set up for common door widths of 35mm, 40mm, 44mm and 54mm. ADAPTABLE SLIDING PLATE AND STOP ADJUSTMENTS: Useful with different guide bush diameters and straight cutters for general mortice work in construction projects. COMPATIBILITY: For use in a 1/2-inch capacity router with 80mm plunge capacity fitted with a 30mm guide bush and 12mm inch cutt

Trend Adjustable Trade Lock Jig For Mortice Lock And Latch Faceplates, LOCK/JIG/B

Trend PH/JIG Pocket Hole Jig TREPHJIG

VERSATILE 15 FUNCTIONS: The Trend Multiscribe Pro is the Swiss Army Knife of marking, scribing and much more; Used to transfer contours from one shape to another and marks onto various materials ADJUSTABLE USES: Scribes internal and external curves, marks parallel lines with fast, easy adjustable backset to suit the scribing gap SQUARE AND MITRE FUNCTION: Can be used for layout work with 5mm increments on the blade, ideal for checking and transferring depths of mortices, grooves, and rebates TWO PENCIL POSITIONS: Ideal for marking narrow and wider circles and arcs or transferring scribe marks 

Trend Multi-Scribe Pro Scriber, Profile Matching Scribing Tool, MS/PRO

Trend KWJ700 kitchen Worktop jig Trade work top jig for up to 700mm worktops. Hard wearing solid laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. Left hand and right hand corners, 400mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps. Fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 650mm and 700mm wide worktops. Cuts up to 40mm thick worktops with or without anti-drip pos

Trend - KWJ700 Worktop Jig

Adaptable compact jig for flattening, surfacing and trenching work on wide or irregular shaped material  IDEAL FOR WIDER MATERIALS Surfaces and flattens stock up to 400mm wide   END GRAIN ROUTING Routing cut across the surface of end grain for clean finish  CONTROLLED CUTTING Depth of cut can be easily controlled with the router plunge for fine skimming cuts or deeper levelling cuts  BI-DIRECTIONAL CUTTING Can be used across or along the grain  HPL MATERIAL High Pressure Laminate running rails and router cradle for wear-free performance, accuracy and durability  TWIN 12MM STAINLESS STEEL RAILS

Trend Router Surfacing Jig

An accurate and easy to use Dovetail Jig for a variety of elegant dovetail joints.   Cuts 12.7mm (1/2 inch) wide half blind dovetails or rebated dovetails in one operation.   Precision made laser cut zinc plated steel template with packing piece.   A Unibase and fine height adjuster may be required for certain makes of router.   A range of accessory templates are available for box joint, dowel and through dovetails.  Contents:  1 x 1/4" Shank TCT 104 degree dovetail cutter 1 x 15.8mm Guide bush

Trend Craft Dovetail Jig 300Mm

PRECISE HINGE RECESSING: Trend’s single piece contractor hinge jig offers accurate and quick recessing of hinges in wooden doors and frames using a plunge router. No more tedious marking out. VERSATILE APPLICATION: Four apertures cater to fire door requirements, while its compatibility with timber-based doors and square butt hinges makes it suitable for both inside and outside doors, rebated frames, and up to 25mm thick fixed stops. TIME-SAVING TOOL: With minimal setup time, this jig is designed for efficient use on-site and in joinery shops, enhancing productivity and delivering excellent res

Trend Hinge Recessing Jig Designed For Accurate Recesses On Wooden Doors & Frames, HINGE/JIG

Lock Jig For Router TRELOCKJIG

A 2-part hinge jig, portable template set designed for recessing hinges in wooden doors and frames. It is easy-to-use with minimal setting-up time, completing the job both accurately and quickly. Used on-site and in joinery shops to increase productivity with excellent results. Four apertures for fire door requirements. No need for marking out in the conventional way. Quick and simple to set-up as the hinge is used as the pattern. Clean and accurate recesses are achieved every time. Suitable for timber based doors and square butt hinges. Use with a light-duty router with 1/4 inch collet. Long 

Trend 2 Part Hinge Jig H/JIG/A TREHJIGA

Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate for larger locks quickly & accurately.  Suitable for DDA (Disabilty Discrimination Act) lock size.   20mm x 235mm radius end face plate, 24mm x 235mm radius end face plate and 17mm x 170mm mortise.  Adaptor plate included to allow smaller templates (239mm x 60mm) to be fitted (as supplied with standard LOCK/JIG).  Suitable for doors 34mm to 58mm thick.  An auger bit and drill is required to complete deep mortises.  The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with

Trend Large Lock Jig

Multi-function pocket hole jig for fast and accurate joining of solid timber and plywood giving strong instant joints. Build cabinets, furniture, and small joinery projects with ease. Hardened drilling sleeves for accurate, consistent pockets. Multi-function design for twin or single hole pockets. Perfect for wide or narrow stock components. * Works with timber thicknesses from 12mm to 38mm * Reversible depth gauges, ideal for new or repair work * Portable and adaptable for multiple jointing sty

Trend Pocket Hole Jig 3 In 1

The Trend Draining Groove Jig is perfect for routing draining grooves in solid timber for Belfast type sinks. Made from 12mm hardwearing CNC machined phenolic. It provides a 0.5° fall with grooves at 50mm pitch and 455mm long. With sight marks for lining up and three removable sloping runners for support. There is also a cutter diameter check hole and fixing holes for user made stops for repetitious work. Includes: 1 x Cove Cutter and 1 x Guide Bush (diameter 30mm). Specification Fall: 0.5°.Groove Pitch: 50mm. Groove Length: 455mm. Slat Width: 19.8mm.

Trend - Draining Groove Jig Dg/jig

Use to find profiles or edges and accurately transfer on to material to be cut. Manufactured in high-quality plastic. Max. depth of profile 45mm.

Silverline Profile Gauge 125mm

The Trend ECL/JIG is a routing jig for Euro cylinder locks in doors.

Trend - Euro Cylinder Lock Jig

Left hand and right hand corners, 400mm radius peninsular joint, 35mm kitchen door hole. Fixed lengths for 600mm, 616mm, 635mm and 650mm wide worktops. Will produce a joint in 15 minutes including set up time. 35mm kitchen cabinet hinge hole. Integral closed double dog bone panel bolt connector recesses. Made from 12mm thick laminate. 4 plastic pins. Trend Kitchen Worktop Jig 650mm Plastic

Trend Kitchen Worktop Jig 650mm Plastic

The Trend PH/JIG/BS Single Pocket Hole Jig is for fast and accurate joining of solid timber and plywood giving strong instant joints in single or multiple fixing positions. It can help to build cabinets, furniture and small joinery projects with ease. The hardened drilling sleeves provide accurate, consistent pockets. There is also a handy built-in drill depth gauge that can be reversed for new or repair work. Works with timber thicknesses from 12mm to 38mm. Portable and adaptable. Supplied with 1 x Pack of Assorted Screws, 1 x 150mm Square Drive Bit and 1 x HSS Drill Bit with Collar.

Category

Brands

Categories

Discounts

Price Range

Shops

Color

Filters