Surge Protection Devices

Electronics

Electronics Accessories

Power

Dehn+Söhne

Eaton

Phoenix Contact

Hager

Siemens

Schneider Electric

Weidmuller

Ubiquiti Networks

Kemo

OBO Bettermann

Finder

Intermatic

Leviton

0.00 Black

White

Multicolor

Color

Neutral

black

multicoloured

Kemo-M168-Car-Voltage-Spike-Protector-Kemo-M168-p-The-Kemo-M168-Car-Voltage-Spike-Protector-permanently-suppresses-all-voltage-spikes-in-the-on-board-power-protecting-sensitive-on-board-electrics-against-damage-during-jump-starting-or-battery-charging-The-voltage-spike-protector-can-also-help-to-extend-the-life-of-car-bulbs-Simply-connect-the-module-parallel-with-the-12V-DC-car-battery-p-Kemo-M168-Car-Voltage-Spike-Protector

Kemo M168 Car Voltage Spike Protector

4 modules in total with no spare useable ways18th Edition CompliantAmendment 3 non-combustible  robust metal enclosureFitted with 1x SPD and 1x 100A main switch

FuseBox T2 Surge Protection Unit With Main Switch

FuseBox Type 2 surge protection device T2 for TN Systems. Compact 1 modular width version that comes with a 32A MCB and connecting cable.

FuseBox T2 Surge Protection Device SP With MCB

BG Type 2 Single Phase Surge Protection Device (SPD)

* For use with BG Fortress Consumer Units * T2 Surge Protection Device + 32A MCB * c/w Live, Neutral & Earth Wires, Busbar & Shroud * Retrofittable * Easy installation * DIN rail mounted devices This BG Fortress Surge Protection wiring kit comes complete with a Type 2 single phase 40kA Surge Protection Device 32A MCB and all wiring needed to install into the BG Fortress range of Consumer Units to protect against transient over voltages. The BG Fortress Surge Protection wiring kit offers a 40kA S

BG T2 SPD Wiring Kit 1 X SPD 1 X 32A MCB

Phoenix Contact - Mains Surge Protector350Vac, Din Rail - 2905470 |Phoenix Contact 2905470

Phoenix Contact 2905470 Mains Surge Protector350Vac, Din Rail

Phoenix Contact - Surge Protector, 6A, 24Vdc, 1Ns - 2908438 |Phoenix Contact 2908438

Phoenix Contact 2908438 Surge Protector, 6A, 24Vdc, 1Ns

Phoenix Contact - Surge Protector, 0.6A, 24Vdc, 1Ns - 2906809 |Phoenix Contact 2906809

Phoenix Contact 2906809 Surge Protector, 0.6A, 24Vdc, 1Ns

EAN: 4044764001305 - manufacturer-number: ASB116 - Current limiter - ASB 116

ASB 116 - Current Limiter ASB 116

Meet the need for coil protection for TeSys Deca contactor New modern look & feel of all machines Digital customer experience for technical documents

Schneider Electric, D40A To D65A RC 110-240V Suppressor, LAD4RCU

EAN: 4013364091016 - manufacturer-number: DFLM255 - Surge protection device 230V 2-pole Mounting method Duct installation, Nominal voltage AC 230V, Max. continuous voltage AC 255V, Nominal load current 16A, Nominal discharge surge current (8/20) (L-N) 3kA, Total discharge current (8/20) (L+N-PE) 5kA, Voltage protection level L-N 1,25kV, Voltage protection level L-PE/N-PE 1,5kV, Number of poles 2, Signalling at the device Acoustic, Max. conductor cross section flexible (fine-strand) 1mm², Category type 3, Degree of protection (IP) IP20 - DFL M 255

DFL M 255 - Surge Arrester DEHNflex, 230V AC, IP20, Typ3, DFL M 255

EAN: 4013364038912 - manufacturer-number: EXFSL300 - Spark gap for lighting protection - EXFS L300

EXFS L300 - Spark Gap For Lighting Protection EXFS L300

EAN: 5019586148940 - manufacturer-number: ASLTT-63 - Device fitting Other, Additional equipment Other, Assembly width (TE) 1, Number of contacts as normally open contact 0, Number of contacts as normally closed contact 0, Number of contacts as change-over contact 0, Number of fault-signal switches 0, Rated switch current 63A, Rated voltage 690V, Voltage type for actuating AC, Suitable for max. number of poles main contact unit (total) 0, Suitable for max. current main contact unit 0A - ASLTT-63

ASLTT-63 - Auxiliary Unit For Modular Devices ASLTT-63

EAN: 3250615514981 - manufacturer-number: SPA700Z - Combined arrester for power systems System configuration TN-C, Number of poles 3, Lightning impulse current (10/350 µs) 7,5kA, Max. continuous voltage AC 255V, Nominal voltage AC 400V, Max. PV-voltage 0V, Voltage protection level 1,5kV, Voltage protection level L-N 1,5kV, Follow current extinguishing capability 25kA, Max. conductor cross section solid (solid, stranded) 50mm², Max. conductor cross section flexible (fine-strand) 35mm², Mounting method Busbar, Construction size Other, Signalling at the device Optic, Test class Type 1 + 2, Degree

SPA700Z - Combined Arrester For Power Systems SPA700Z

EAN: 3250615515032 - manufacturer-number: SPA811Z - Combined arrester for power systems System configuration TN-S, System configuration TT, Number of poles 4, Lightning impulse current (10/350 µs) 12,5kA, Max. continuous voltage AC 255V, Nominal voltage AC 400V, Max. PV-voltage 0V, Voltage protection level 1,5kV, Voltage protection level L-N 1,5kV, Voltage protection level L-PE 1,5kV, Voltage protection level N-PE 1,5kV, Follow current extinguishing capability 25kA, Max. conductor cross section solid (solid, stranded) 50mm², Max. conductor cross section flexible (fine-strand) 35mm², Mounting m

SPA811Z - Combined Arrester For Power Systems SPA811Z

EAN: 8435297850724 - manufacturer-number: STPT2-40K275V-2PG - Surge protection for power supply System configuration TN-S, System configuration TT, Number of conductors (without earthing) 2, Nominal discharge surge current (8/20) 20kA, Nominal voltage AC 400V, Short-circuit breaking capacity (Isccr) 25kA, Max. continuous voltage AC 275V, Max. discharge surge current (8/20) 40kA, Mounting method DIN rail (top hat rail) 35 mm, Construction size 2 modular spacing, Voltage protection level 1,3kV, Max. conductor cross section solid (solid, stranded) 35mm², Max. conductor cross section flexible (fin

STPT2-40K275V-2PG - Surge Protection For Power Supply STPT2-40K275V-2PG

EAN: 9007947412614 - manufacturer-number: DCSPDTyp1+2GEN24 - Surge protection DC SPD type 1+2 GEN24 network form DC, nominal voltage DC 1000V, highest continuous voltage DC 1200V, The surge protection type 1+2 for direct and indirect lightning strikes is for use with the Fronius Symo GEN24 Plus and Fronius Primo GEN24 Plus inverters (all performance classes ) suitable. The surge protection is equally applicable to all devices, regardless of whether 1 or 2 trackers are used. When operating with only one tracker, one input on the surge protection remains unused. The surge protection is delivered

DC SPD Typ 1+2 GEN24 - Surge Protection For Power Supply DC SPD Typ 1+2 GEN24

EAN: 4013364155046 - manufacturer-number: DCUYPVSCI10001M - Surge protection for power supply Nominal discharge surge current (8/20) 12,5kA, Mounting method Direct mounting, Construction size Other, Max. PV-voltage 1000V, Voltage protection level 4kV, Signalling at the device Optic, Category type 2, Degree of protection (IP) IP65 - DCU YPV SCI 1000 1M

DCU YPV SCI 1000 1M - Surge Protection For Power Supply DCU YPV SCI 1000 1M

EAN: 4013364126428 - manufacturer-number: DGMYPVSCI1000 - Surge protection for power supply Nominal discharge surge current (8/20) 12,5kA, Mounting method DIN rail (top hat rail) 35 mm, Construction size 3 modular spacing, Max. PV-voltage 1000V, Voltage protection level 4kV, Max. conductor cross section solid (solid, stranded) 35mm², Max. conductor cross section flexible (fine-strand) 25mm², Signalling at the device Optic, Category type 2, Degree of protection (IP) IP20 - DG M YPV SCI 1000

DG M YPV SCI 1000 - Surge Protection For Power Supply DG M YPV SCI 1000

EAN: 3250615514998 - manufacturer-number: SPA701Z - Combined arrester for power systems System configuration TN-S, Number of poles 4, Lightning impulse current (10/350 µs) 7,5kA, Max. continuous voltage AC 255V, Nominal voltage AC 400V, Max. PV-voltage 0V, Voltage protection level 1,5kV, Voltage protection level L-N 1,5kV, Voltage protection level L-PE 1,5kV, Voltage protection level N-PE 1,5kV, Follow current extinguishing capability 25kA, Max. conductor cross section solid (solid, stranded) 50mm², Max. conductor cross section flexible (fine-strand) 35mm², Mounting method Busbar, Construction

SPA701Z - Combined Arrester For Power Systems SPA701Z

Phoenix Contact VAL-MS Valvetrab mains surge protector, black, poles design 3+N/PE, protection class B coarse/C medium, mains form TN-S, other, design DIN-rail module, rated voltage 230 - 400V, max. Continuous voltage AC 275V, DIN size 4 TE (Grid size), max conductor cross-section flexible 25mm².

Phoenix Contact VAL-MS Mains Surge Protector - 2838209

EAN: 4012196159697 - manufacturer-number: V50-3+NPE-280 - Combined arrester for power systems Number of poles 4, Lightning impulse current (10/350 µs) 12,5kA, Max. continuous voltage AC 280V, Nominal voltage AC 230V, Voltage protection level 1,3kV, Voltage protection level L-N 1,3kV, Max. conductor cross section solid (solid, stranded) 35mm², Max. conductor cross section flexible (fine-strand) 25mm², Mounting method DIN rail (top hat rail) 35 mm, Construction size 4 modular spacing, Signalling at the device Optic, Test class Type 1 + 2 - V50-3+NPE-280

V50-3+NPE-280 - Combined Arrester For Power Systems V50-3+NPE-280

EAN: 8435297850823 - manufacturer-number: STPT2-40K275V-4PG - Surge protection for power supply System configuration TN-S, System configuration TT, Number of conductors (without earthing) 4, Nominal discharge surge current (8/20) 20kA, Nominal voltage AC 400V, Short-circuit breaking capacity (Isccr) 25kA, Max. continuous voltage AC 275V, Max. discharge surge current (8/20) 40kA, Mounting method DIN rail (top hat rail) 35 mm, Construction size 4 modular spacing, Voltage protection level 1,3kV, Max. conductor cross section solid (solid, stranded) 35mm², Max. conductor cross section flexible (fin

Category

Brands

Categories

Discounts

Price Range

Shops

Color

Filters

Categories

Price Range

Discounts

Brands

Shops

Color

Shoparize

Shoparize Business